Retrotec USACE - Manual (Page 456)

REF2 ENERGY & PROCESS ASSESSMENT PROTOCOL
Fuller, Sieglinde K., & Stephen R. Peterson. “Life-Cycle Costing Manual for the Federal En-
ergy Management Program.” (1995). NIST Handbook 135. U.S. Department of Com-
merce (USDOC), National Institute of Standards and Technology (formerly National
Bureau of Standards) (NIST).
Galitsky, Christina, and Ernest Worrell. (January 2003). Energy Effi ciency Improvement and
Cost Saving Opportunities for the Vehicle Assembly Industry, a Guide for Energy and
Plant Managers. Berkeley, CA: Environmental Energy Technologies Division, Ernest
Orlando Lawrence Berkeley National Laboratory.
Guide to Energy Effi ciency Opportunities in Canadian Foundries. Website. Accessible
through http://oee.nrcan.gc.ca/cipec/ieep/newscentre/guides.cfm?PrintView=N&Text
=N#foundries.
Herron Dale, Alexander Zhivov and Michael Deru. 2009. Energy Design Guides for Army
Barracks. ASHRAE Transactions. Atlanta, GA: American Society of Heating, Refrigerat-
ing and Air Conditioning Engineers (ASHRAE). Volume 115, Part 2.
International Energy Agency Energy Conservation in Buildings and Community Systems Pro-
gramme. (May 1983). Technical Note AIC 10,”Techniques and Instrumentation for the
Measurement of Air Infi ltration in Buildings: A Brief Review and Annotated Bibliog-
raphy,” Air Infi ltration Center, Old Bracknell Lane West, Bracknell, Berkshire, Great
Britain, RG12 4AH. Accessible through
www.aivc.org.
Lin, Mike C.J., and Walter Smith. Process Optimization Guide for Military Manufacturing
and Maintenance Facilities. (March 1999). USACERL Technical Report (TR) 99/35/
ADA365997. Champaign, IL: U.S. Army Construction Engineering Research Labora-
tory (CERL).
Lin, Mike C. J., A. M. Zhivov, V. M. Boddu, D. Osborn, W. P. Smith, C. Bjork, M. J. Chimack,
& R. A. Miller. (September 2004). ERDC/CERL TR-04-17/ADA435892. Process and
Energy Optimization Assessment: Rock Island Arsenal, IL. Champaign, IL: Engineer
Research and Development Center, Construction Engineering Research Laboratory
(ERDC-CERL).
Livchak, Andrey. Energy Effi cient Ventilation Systems for Dining Halls and Kitchens. Pre-
sented at the Second Workshop “Energy Effi cient Technologies for Government Build-
ings - New and Rerofi ts” Chicago IL, January 9-20, 2006. http://www.annex46.org/work-
shops_seminars/second_workshop_chicago/
Methodology for Conduction of Energy Inspection (Audit) of the Budgetary Establishments
and Buildings. 2d ed. (2003). Administration of the Nizhny Novgorod region, Nizhny
Novgorod State Technical University. Nizhny Novgorod.
Mroz, Tomasz (ed.). Subtask A Report, Overview of Retrofi tting Measures. (September 2003).
Working Document. IEA ECBCS Annex 36: Retrofi tting in Educational Buildings—
Energy Concept Adviser for Technical Retrofi t Measures.
Muller, Michael, and Kyriaki Papadaratsakis. Self-Assessment Workbook for Small Manufac-
turers, Version 2.0. (October 2003). Sponsored by DOE/OEERE, Center for Advanced
Energy Systems, the State University of New Jersey (Rutgers).
Muller, Michael, Don Kasten, Kevin Comer, Michael Simek, Chris Tierney, & Gustavo Garcia.
Industrial Productivity Training Manual. 1996 Annual IAC Director’s Meeting, spon-
sored by DOE/OIT, The State University of New Jersey (Rutgers).
Neumann, C. et al., “Building EQ—Working Document WP3: Requirements for data and
measurement equipment,” Guidelines for the evaluation of building performance, draft,
Nov. 2007.
“Review of International Airtightness.” (2001). Thermal Insulation and Indoor Air Quality
Criteria. AIVC TN 55.
Smith, Walt. (April 1997). Integrating Energy and Process Systems. The EUN/APEM Energy
Management Training Series.
Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Proce-
dures for Commercial Building Energy Audits. American Prepared under ASHRAE Re-
search Project RP-669 and ASHRAE Special Project SP-56 in cooperation with TC 9.6,
Systems Energy Utilization (now TC 7.6). Atlanta, GA: ASHRAE.