Grass Valley iTX Desktop v.2.6 - Manual (Page 344)

Working with the Logo Editor
Set a transition or vision effect for a logo
iTX can apply a transition or vision effect when switching a logo on and off; it can also play a
sound effect at the same time. You set options that control such operations in the Logo Options
dialog:
1. Select a logo in the Logo Editor.
2. Click Options to display the Logo Options dialog.
3. Select IN. Then do one of the following to set the transition or vision effect for the logo in-
point.
•
Click a transition-type selection button to select a cut or cross-fade transition. If you
select a cross-fade transition, set the transition duration by entering a value (in
seconds:frames) in the Dur box.
• Click WIPE, SLIDE or SQUEEZE to select a vision effect; click one of the arrow buttons
to select the direction; enter a value (in seconds:frames) in the Dur box to set the
duration of the effect.
4. Select OUT. Then do one of the following to set the transition or vision effect for the logo
out-point.
•
Click a transition-type selection button to select a cut or cross-fade transition. If you
select a cross-fade transition, set the transition duration by entering a value (in
seconds:frames) in the Dur box.
• Click WIPE, SLIDE or SQUEEZE to select a vision effect; click one of the arrow buttons
to select the direction; enter a value in the Dur box to set the duration of the effect.
5. Do the following if you want iTX to play a sound effect with a visual effect.
• Select IN or OUT depending on whether you want to associate a sound effect with the
in-point or out-point.
• Click Audio to open PinPoint. Use PinPoint to select an audio file from the System
Database. More details , page 179.
March 2015 iTX Desktop: Operator Manual 324