Automatically centralize an object, Changing the stacking order of objects, Re-order layers – Grass Valley iTX Desktop v.2.6 User Manual
Page 244
The CG application
You can move multiple objects together after selecting them as a group.
, page
Automatically centralize an object
Instead of dragging an object, you may select an option from the CG application menu to locate
it centrally.
You can perform this procedure while the CG application is in any operating mode.
1.
Right-click an object to display the CG application menu and select one of the options:
•
Full Centre, to centralize the object both horizontally and vertically.
•
Vertical Centre, to centralize the object vertically.
•
Horizontal Centre, to centralize the object horizontally.
You can select and centralize multiple objects together.
Changing the stacking order of objects
The CG application stacks objects, one on top of the other, as you add them to the workspace.
It puts the first object at the bottom, and the last one at the top. Objects higher up the stack
can obscure objects below them.
You can move an object up or down the stack by selecting an option from the CG application
menu:
Re-order layers
You can perform this procedure while the CG application is in any operating mode.
1.
Right-click an object to display the CG application menu, and select one of the options:
•
Move Back, to move the object down one position.
•
Move Forward, to move the object up one position.
•
Send to back, to place the object underneath all other objects.
•
Send to front, to place the object above all other objects.
You can select and move multiple objects together.
March 2015
iTX Desktop: Operator Manual
224