Toa D-2000 Series - Manual (Page 96)

96
Contact output function assignment: Console Switch
Assigning a Console Switch Function to a Terminal.
A contact output closes ("makes") or opens ("breaks") in synchronization with the D-2012C's function key
ON/OFF operations set here. The Momentary and Latch methods can be used for contact output operation.
Step 1. Click each terminal's Function button to select "Console Switch" from the pull-down menu.
Step 2. Click the Control button to select the control method of "Momentary" or "Latch" from the pull-down
menu.
Step 3. Click the Position button to select the D-2012C's ID number from the pull-down menu.
Step 4. Click the Channel/Contact button to select the D-2012C's function key number from the pull-down
menu.
D-2012C function
key operation
• Momentary method
• Latch method
ON
OFF OFF
ON
OFF
ON ON ON ON
OFF OFF OFF
Contact output
operation
Make
Break Break
Make
Over 100 ms
Over 100 ms
D-2012C function
key operation
Contact output
operation
Make
Break Break
Make