Toa D-2000 Series - Manual (Page 56)

56
7.3.4. Comp/leveler view (Compressor/Auto-Leveler function settings)
Clicking either the C/L box in the Input Flow view or the Comp box in the Output Flow view displays the
Comp/Leveler view in the Contents view.
Compressor or Auto-Leveler mode can be selected for input channels.
Output channels have the Compressor function but not Auto-Leveler function.
The box contains a mode display and an ON/OFF button for each box.
The box and Content view are interlocked, allowing the same setting to be performed from either of the two.
For Auto-Leveler function, see p. 152 .
(2) (3) (4) (5) (6) (7) (8) (9) (1)
[C/L box (when Compressor mode is selected) and Comp box]
Compressor mode display
(9)
[C/L box (when Auto-leveler mode is selected)]
Auto-leveler mode display
(9)
Compressor function settings
The setting screens used here are examples for the input channel.
In output channel, there are no indications/settings related to the Auto-Leveler function.
Note
Parts (1) through (9) are explained on
the next page or later.