Toa D-2000 Series User Manual
Page 47

47
7.3.1. Module view
The "Module" of the Input Flow view represents the connector for the module an audio input channel has been
assigned to.
Microphone/line Input module view (Available only when the D-921E, D-921F, or D-2000AD1 is used)
Click the "D-921" or "D-2000AD1" box displayed on the input slot in the Flow View. The Microphone/Line Input
Module View is then displayed on the Contents View.
The module box and contents view displays are interlocked, allowing the same setting to be performed from
either of the two displays.
[Module box (when the D-921E or D-921F is used)]
(1)
(2)
(3)
(1)
(2)
(1)
(2)
[Microphone/line Input module view (when the D-921E or D-921F is used)]
[Module box (when the D-2000AD1 is used)]
Note
Parts (1) through (3) are explained on
the next page
.