Toa D-2000 Series - Manual (Page 18)

18
Step 9. Click the "Next" button.
• Checking the input checkbox in "CobraNet Setting" on the I/O Setting screen causes the CobraNet
Channel Use screen to be displayed. (Advance to Step 10.)
• If the input checkbox remains unchecked in "CobraNet Setting" on the I/O Setting screen, the
channel setting screen (same screen as in Step 11) is displayed. (Advance to Step 12 on the next
page .)
Step 10. Set the CobraNet Channel Use Settings.
Select the use for each CobraNet channel in 2-channel units.
Select from "CobraNet In," "CobraNet Sub In," or "CobraNet Bus."
Step 11. Click the "Next" button.
The Channel Setting screen is displayed.