Toa D-2000 Series - Manual (Page 79)

79
Time correction settings between Xover boxes
Clicking the "Driver Alignment" tab causes the time correction setting screen between Xover boxes to be
displayed.
(6)
(5)
(4)
(3)
(2) (1)
(1) Minimum variation unit selection buttons [Increments]
Select the minimum units of the delay time that can be changed with the Up and Down buttons.
(2) Option button
If you click this button, a delay option dialog is displayed and you
can select the unit of distance displayed on the delay distance
indication button from meters, inches, and feet.
You can also set the temperature on the basis of which the delay
distance displayed is calculated.
(3) Delay time indication button [Time (ms)]
Displays the delay time in each channel by means of numerical
values. If you click this button, a dialog for delay time setting is
displayed, enabling you to set the delay time by directly entering a
numerical value.
(4) Delay distance indication button [Distance (meters/inches/feet)]
Displays the delay distance in each channel by means of
numerical values. If you click this button, a dialog for delay
distance setting is displayed, enabling you to set the delay
distance by directly entering a numerical value.
(5) Up/Down button
Changes the delay time in minimum variation units.
(6) Delay ON/OFF button [On/Off]
Displays the ON or OFF status of the Delay function.
Click this button to turn on and off the delay function.