Toa D-2000 Series - Manual (Page 124)

124
9.1.3. Logging on when the user level is enabled
Enabling the user level displays the following logon screen when the setting file is opened next time.
When logging on as an administrator, enter a set password and click the "OK" button. If a different method
than this is used to close the logon screen, the user level is logged on as an operator. The level logged on is
displayed on the right side in the upper part of the main screen as "Administrator" or "Operator."
Administrator:
Operator:
9.1.4. Operations that can be restricted
The following operations can be restricted depending on the user level.
• Unit creation, deletion, and configuration change (Also, import operation from the file menu cannot be
performed.)
• Unit name change and memory setting change
• Storage in memory (Prohibits storage against all Memories)
• Change safe function setting change
• Write protection to function boxes
Note
The above operations are restricted only on the D-2000 Setting Software. They can be performed from the D-
2012C or by means of external control.
9.1.5. Performing restriction settings
Step 1. Select "Option Security Settings" from the menu.
The Security Settings dialog is displayed.