Toa D-2000 Series User Manual
Page 71

71
7.3.8. Delay view (Delay function settings)
Clicking the Delay box in the Bus/Output flow view displays the Delay view in the Content view. The Delay box
contains the Delay ON/OFF button and Delay Time display. The box display is interlocked with the Content
view display, and the same Delay ON/OFF settings can be performed from either of the two.
(2)
(1)
(6)
(5)
(4)
(3)
(1) Minimum variation unit selection button (Increments)
Selects the minimum units of the delay time that can be changed with the Up and Down buttons.
(2) Option button
If you click this button, a delay option dialog is displayed and you
can select the unit of distance displayed on the delay distance
indication button from meters, inches, and feet.
You can also set the temperature displayed on the delay
distance indication button for distance calculation.
(3) Delay time indication button [Time (ms)]
Displays the delay time in each channel by means of numerical
values. If you click this button, a dialog for delay time setting is
displayed, enabling you to set the delay time by directly entering
numerical values.
[Delay box]
Delay time display
Delay ON/OFF button
[Delay view]