Toa D-2000 Series - Manual (Page 26)

26
5.3.3. Confirming the slot information
Select "Unit Slot Information..." from the menu to display the Slot Information screen.
The screen offers information on the module settings and the module status while the PC is in communication
with the unit.
• PC side ID: Unit ID of the setting data on the PC
• Slot No.: Slot number of the module on the unit's rear panel
• Module Settings: Model of module stored in memory
• Module Status: Model of module inserted in unit
If the Module settings and Module status information on a slot do not match, the slot data is highlighted in red
as shown below.
Note
Unless the Module settings and Module status information on all slots exactly match with each other, the unit
does not operate correctly.
(For procedure, please refer to
the next page .)