beautypg.com

Toa D-2000 Series User Manual

Page 160

background image

160

Banquet hall A

• Memory 1 (3-divided room setting pattern for each divided room A, B, and C)

In the morning, Banquet halls A, B, and C are individually used.

Change Safe group setting: None

Change Safe group setting: Group (a)

Banquet hall B

Banquet hall C

Banquet hall A

• Memory 2 (2-divided room setting pattern for each divided room A, and B + C)

Banquet halls B + C

Afternoon, Banquet hall A remains in use, while Banquet halls B and C
are not individually used, being combined into 1 room for which the
D-2012C dedicated to Banquet hall B is used.

13.3.5. Description for settings

[Example of use]

Below is an example where one of divided 3 rooms remains in use with 3-divided room setting pattern, and its
setting pattern is switched to 2-divided room setting pattern after the remaining 2 rooms are combined into
one.

[Settings and usage]

• Assign input and output channels, and signal routing to the Change Safe group (a).
• Memory 1 has the setting pattern to be used for each of Banquet halls A, B, and C. No Change Safe group

is set.

• Memory 2 has the setting pattern to be used for an independent Banquet hall A and a combined B & C hall

separately. The Change Safe group is set to the group (a).

• When Memory 1 is switched to Memory 2, the parameters for Fader and Matrix Point belonging to the

Change Safe group (a) are maintained owing to the Change Safe group function.

• If the microphone and speaker channels in Banquet hall C are set to Fader Layer 2 of the D-2012C

dedicated to Banquet hall B, this allows the same D-2012C to operate for the combined B & C hall.

• In this example above, if 2 divided rooms are supposed to be fixed for use, recalling the preset Memory 2

needs the channel and routing for Banquet hall A to have been recalled first. In this case, Memory 2 cannot
be used, and other preset memory assigned to no Change Safe group is required. For example, prepare
and use Memory 3 having a 2-divided room setting pattern which is created for the system of Banquet hall A
and a combined B & C hall with the Change Safe group set to "None."