Toa D-2000 Series - Manual (Page 106)

106
8. D-2012C FUNCTION SETTINGS
Selecting the D-2012C Remote Console Unit to be set in the Unit view causes the Console view to be
displayed in the Main view.
Unit view Console view
Step 3. Set the Fine Gain Command.
Set whether the Fine Gain Command is used or not when the channel fader gain is controlled with
external control command.
The Fine Gain Command permits the gain value to be set in 0.1 dB units.
Note
For details about external control protocol, refer to the separate Protocol Specification for External
Control Communication, the latest edition of which can be obtained from our download site
http://www.toa-products.com/international/ .
Step 4. Click the "OK" button.