Toa D-2000 Series - Manual (Page 31)

31
6.3. Memory View
The memory view is located at the lower left of the main
screen.
It displays the preset memory (see
p. 149 ) names and the
preset memory numbers being currently selected. It is
possible to recall preset memories and also to write data into
the preset memories.
The panel can be opened or closed by clicking the Memory
List Panel Open/Close button.
When the memory list panel is open, the cross-fade time is
also displayed.
• It displays the preset memory names and the preset memory numbers being currently selected.
• To recall the Preset Memory, use the Up and Down buttons to display the memory number to be changed,
then click the "Change" button.
The menu bar can also be used to recall. (See
p. 149, "Recalling the Preset Memory." )
• Editing the recalled Preset Memory enables the "Trash" button display. Clicking the "Trash" button discards
the data in edit and recalls the original data.
• To write data into Preset Memory, use the Up and Down buttons to display the preset memory number to be
stored, then click the "Store" button.
The menu bar can also be used to write. (See
p. 149, "Writing Data into the Preset Memory." )
• The Change Safe group indication shows the Change Safe groups to which the selected preset memory
belongs. This indication appears only when the Change Safe function is enabled. (Refer to p. 126 .)
Memory view
[Memory list panel closed:]
Change Safe group
indication
Preset memory number
Memory list panel
open/close button
Preset memory name
Store button
Up and down buttons
Change button Trash button