Toa D-2000 Series - Manual (Page 143)

143
If all data for the Module settings and the Module status do not match exactly, the Slot Information
screen is displayed during connection.
• Module Settings:
Model of module stored in memory
• Module Status:
Model of module inserted in the unit
If data and status for the module do not match;
The unmatched data on module models are highlighted in red as shown above.
Unless all data for the Module Settings and the Module Status match with each other, the unit does
not operate correctly.
[Operating the unit according to the Module Settings]
Click the "No" button to disconnect communications, and reinstall modules into the unit correctly.
[Operating the unit according to the Module Status]
Click the "No" button to disconnect communications, and change the Module Settings.
Tip
Clicking the "Yes" button permits correct operation only for the unit's slot-mounted modules of which
Module Settings and Module Status data match with each other.