Toa D-2000 Series - Manual (Page 28)

28
6. MAIN SCREEN AFTER COMPLETION OF UNIT CONFIGURATION
Menu (See p. 12 .)
Main view (See p. 38 and 106 .)
Unit view (See p. 29 .), Connection status view (See p. 30 .)
Memory view (See p. 31 .)
Monitor view* (See p. 33 .)
* Monitor view is displayed only when in online mode.
Please refer to p. 130 regarding putting the unit in online mode (when a PC is in communication with the
unit).
Note
If communications error occurs between the D-2008SP and PC when bulk
receiving (see
p. 144 ) is executed, the monitor view screen will change as shown
at right.
In such cases, initialize the setup data, or execute the bulk reception again after
checking to see if all the units are connected correctly.