Toa D-2000 Series - Manual (Page 12)

12
4.2. Menu Item Description
4.2.1. File
New: Creates (sets) a new data file.
Open... : Calls up the existing data file.
Note
The following logon screen may be displayed.
This screen appears when a user level is set.
(Refer to
p. 124, "Logging on when the user level is enabled." )
Save: Overwrites the file being edited.
Save As... : Saves the file being edited under a different name.
Exit: Exits the D-2000 Setting Software.
Import: Imports (loads) only the information on the D-2008SP with ID1 out of the
existing data files, and adds it into the file being edited.
Note
It is not possible to import the information on the D-2012C and the one on
the D-2008SP other than that with ID1.
4.2.2. Edit
Copy: Copies the value set for the function box selected on the flow view (see
p. 38 ) to the clipboard.
Paste: Pastes the data in clipboard to the function box selected on the flow view.
Initial value: Initializes the value set for the function box selected on the flow view.
Box Write Protect...
Off: Sets no restriction on write to box.
Low: Restricts the operator from changing the parameters set in the box.
Mid: Restricts the operator from changing all settings in the box.
High: Restricts the administrator from changing the parameters set in the box,
and the operator from changing all settings in the box.
4.2.3. View
Contents View...
Show/Hide: Shows or hides the contents view. (See p. 46 .)
Floating: Floats the contents view window.
Docking: Docks the contents view window.
Level Monitor View...
Show/Hide: Shows or hides the level monitor view. (See p. 34 .)
Floating: Floats the level monitor view window.
Docking: Docks the level monitor view window.
Split: Displays the different level areas in a single D-2008SP one above the
other.
All Mute View...
Show/Hide: Shows or hides the all mute view. (See p. 36 .)
All Mute: Turns on or off the all mute function.
Routing Monitor View...
Show/Hide: Shows or hides the routing monitor view. (See p. 37 .)