Toa D-2000 Series - Manual (Page 39)

39
7.1.1. Input flow view
In this flow view, input-related Module, Trim, Filter, C/L, Automix, Meter and Fader boxes are arranged side by
side.
Audio In, Ext In and CobraNet In channel areas are also displayed.
Channel area
Stereo/monaural display
Channel name
Channel number
Slot number
Module type
Change safe group
(displayed only when the Change Safe function is enabled)
Flow/Matrix selection tab
Fader (See p. 66 .)
Meter (See p. 34 .)
Auto mix (See p. 61 .)
Compressor/Auto-leveler (See p. 56 .)
Input filter (See p. 53 .)
Trim (See p. 52 .)
Module (See p. 47 .)
Channel information (See below.)
• Channel information
There are three types of channel areas:
: Audio In : Ext. In : CobraNet In