Toa D-2000 Series - Manual (Page 127)

127
Step 3. Select the Power On Memory number to be set from the
pull-down menu.
Note
The Last Memory cannot be set.
Step 2. Tick the "Enable the Change Safe function" checkbox.
The Power On Memory Setting dialog is displayed.
Notes
• When the Change Safe function is enabled, no Change Safe group can be set for the Power On
Memory function.
• The Change Safe groups assigned to channels, preset memories, and matrix crosspoints are all
cleared at the time when the Change Safe function is disabled.
9.2.1. Enabling the Change Safe function
Step 1. Select "Option Change Safe Setting" from the menu.
The Change Safe Setting dialog is displayed.