Toa D-2000 Series - Manual (Page 88)

88
Contact input function assignment: Channel On/Off
Assign the channel ON/OFF function to the terminal.
Step 1. Click each channel's Function button to select "Channel On/Off" from the pull-down menu.
Step 2. Click the Parameter button to select the control method of "Make" or "Pulse" from the pull-down
menu.
Step 3. Click the Position button to select the channel position from the pull-down menu.
Step 4. Click the Channel/Contact button to select the channel number from the pull-down menu.
Note
When the control method is set to "Pulse," switching off the power without saving the Channel ON/OFF status
remotely changed by way of the D-981, D-983 or D-984VC modules returns the Channel ON/OFF status to
that stored in the preset memory.