Toa D-2000 Series - Manual (Page 105)

105
7.7. External Control Port Settings
Either the serial port or TCP/IP port can be selected as external control port for the D-2008SP.
The setting procedure is shown below.
Note
This setting cannot be performed online.
Step 1. Select "Option External Control Port Setting..." from the menu.
The External Control Port Setting screen is then displayed.
2-2. When using the TCP/IP port
Select the TCP/IP port and enter a TCP port number from 3000 to 49151.
Select one of the following 4 RS-232C's
communication speeds (Baud rate).
• 115200 bps
• 38400 bps
• 19200 bps
• 9600 bps (default)
Step 2. Set the port to be used.
2-1. When using the serial port
Select the serial port and set the communication speed (Baud rate).