Toa D-2000 Series User Manual

Page 135

Text mode
Original mode

135

Step 9. Update Firmware.

Select a unit from the Uncontrollable units list and click the "Firmware update" button.

Only when the D-2008SP is used, the following message is displayed.
If data backup is completed, click the "Firmware update" button.

The firmware is updated.

After firmware update is completed, the unit is shown in the Controllable units list.

Important

Be sure to perform "D-2012C Fader Adjustment" (see

p. 139

) when you have updated the

D-2012C's firmware version from 4.0.0 or earlier to 4.1.0 or later.

Note
This procedure does not update the D-2012C firmware of version 2.0.0.
In this case, use the dedicated "D-2012C Firmware Updater software” in the CD supplied with the D-
2008SP (firmware version 3.0.0 or later). For details, refer to the separate installation manual.