Toa D-2000 Series - Manual (Page 37)

37
6.7. Routing Monitor View
In the Routing Monitor view, double-clicking the channel box displays the signal routing from the box. For
instance, when the input channel box is double-clicked, all the assigned busses and all output channels
assigned to each bus are displayed in Tree view. The channel belonging to the selected box in the Routing
Monitor view is a selected channel. To change the selected channel, double-click other channel.
The display can be switched between showing and hiding views from [View
Routing Monitor View
Show/Hide] on the menu.
(1)
(2)
(3) (4)
(1) Level meter
Indicates the signal level corresponding to the selected channel at the points below.
Input channel: Pre-fader
Bus channel: Pre-fader and after-fader
Output channel: After-fader
(2) Channel box
The channel information is displayed in the box. The selected channel is shown with its channel box in a
red frame.
(3) Expand/collapse button
Expands or collapses the tree view for the assigned channel boxes.
(4) Selected channel indication
Indicates the selected channel.