Toa D-2000 Series - Manual (Page 164)

164
Setting Item Setting Range Initial Value
Center Frequency 20 Hz to 20 kHz, 1/24 octave steps 1000 Hz
Gain (Boost/cut) – 15 to +15 dB, 0.1 dB steps 0 dB
Q 0.267 to 69.249 4.318
FILTER ON/OFF ON, OFF ON
[Feedback Suppression Filter Setting]
Note: Automatically set by the D-2008SP Digital Mixing Processor Unit's software.
[Feedback Suppression Settings]
Setting Item Setting Range Initial Value
Dynamic Mode ON, OFF OFF
(Dynamic Mode ON/OFF)
Auto : Dynamic (Number of the 0 : 12, 1 : 11, 2 : 10, 3 : 9, 4 : 8, 5 : 7, 6 : 6, 7 : 5
filters used in each mode) 7 : 5, 8 : 4, 9 : 3
[Delay Settings]
Setting Item Setting Range Initial Value
Delay Output delay: 0 – 1360 ms, 0 ms
0.021 ms steps
Bus delay: 0 – 677 ms
0.021 ms steps
ON/OFF ON, OFF OFF
[Ducker Settings]
Setting Item Setting Range Initial Value
Priority level 1 – 8 (1 : highest level, 8 : lowest level) 8
Depth –∞, –69 to 0 dB, 1 dB steps –20 dB
Attack time 10, 20, 50, 70, 100, 120, 150, 200, 250, 300, 10 ms
500, 700, 1000, 2000, 3000, 5000, 10000 ms
Release time 10, 20, 50, 70, 100, 120, 150, 200, 250, 300, 100 ms
500, 700, 1000, 2000, 3000, 5000, 10000 ms
ON/OFF ON, OFF OFF
[NOM Attenuation Settings]
Setting Item Setting Range Initial Value
Attenuation Gain 0 – 20 (0 log
10
NOM – 20 log
10
NOM) 10 (10 log
10
NOM)
ON/OFF ON, OFF OFF
Setting Item Setting Range Initial Value
ON/OFF ON, OFF OFF
[Mute Function Settings]