Toa D-2000 Series User Manual
Page 141
141
10.
5
. Communications
Connect to the unit displayed "Connectable units" field in the Unit's IP setting screen.
Step 1. Select "Communication
Connect...," "Communication
Bulk Transmission...," or
"Communication
Bulk Receiving..." from the menu.
• Connect...:
If the setting data of the PC differ from those of the destination units, transfer
direction can be set for each item. (See
p. 144
.)
• Bulk Transmission... : Transfers all setting data from a PC to each unit in bulk. (See
p. 145
.)
• Bulk Receiving... :
Transfers all setting data from each unit to a PC in bulk. (See
p. 145
.)
Notes
• If no unit has been set on the D-2000 Setting software, only "Bulk Receiving..." can be selected.
• All data related to the D-2012C are stored in the D-2008SP. (The D-2012C has no data.) So, even if
the D-2012C is not detected on the network, the bulk reception of the setting data is possible.
While the screen below is displayed, the target unit designated with the connection settings are being
detected.