Toa D-2000 Series - Manual (Page 117)

117
[Motorized Fader and Rotary Encoder Channel Settings]
The D-2012C Remote Console features four fader layers capable of storing combinations of channel
assignments for 12 motorized faders and 8 rotary encoders. Stored fader layers can be recalled anytime using
the function key to which the “Fader Layer” function has been assigned, independent of preset memory.
Assign any desired channel to the motorized fader and rotary encoder.
Two methods are available for the setting: one to set in the Console setting view and the other to set from the
menu. (These methods are possible only when offline.)
The following procedure is a method to assign channels to individual motorized faders and rotary encoders in
the Console setting view.
Step 1. Select the layer to be set from 4 Fader Layer Selection tabs in the Console setting view.
Method 1
1
2
2