Toa D-2000 Series User Manual
Page 14
14
4.2.7. Option
Security Settings:
Set the user level and the restriction of operations. (See
p. 123
.)
Change Safe Setting:
Performs the Change Safe function while offline. (See
p. 126
.)
Console SEL/MONI Link Setting:
Performs the console SEL/MONI interlock setting. (See
p. 129
.)
Contact Input Setting... :
Sets the contact inputs of the D-981 or D-983 Remote Control Module, or
the D-984VC VCA Control Module. (See
p. 85
.)
Contact Output Setting... :
Sets the contact outputs of the D-981, D-983, or the D-984VC.
(See
p. 91
.)
VCA Module Setting... :
Sets fader assignments for the D-984VC VCA Control Module.
(See
p. 97
.)
CobraNet Module Setting
CobraNet Bundle Setting:
Sets the Cobranet bundle number for the selected unit. (See
p. 101
.)
CobraNet Bundle Matrix Setting: Sets the Cobranet bundle number in matrix format when 2 or more
D-2008SPs (max. 4 units) are Cobranet-connected to each other.
(See
p. 103
.)
Wordclock Setting... :
Selects the synchronization for the word clock. (See
p. 104
.)
External Control Port Setting... :
Sets interface communication speed with such external control equipment
as the AMX. (See
p. 105
.)
Fader Layer Change
Layer (1 – 4):
Recalls the D-2012C's fader layer. Layers not assigned to D-2012C's
function keys cannot be recalled. (See
p. 122
.)
Power On Fader Layer
Last Layer/Layer (1 – 4):
Selects the fader layer to be recalled when the D-2012C's power is
switched on. Selection is made from either the Last Layer or Layers 1 – 4.
Layers that have not been assigned to the D-2012C's function keys
cannot be selected. Selecting Last Layer causes the D-2012C to start with
the layer number recalled just before the power was switched off. (See
p.
122
.)
Note
This setting is valid only when the Fader Layer Recall function is set to
"None." (See
p. 122
.)
Console Setting:
Performs the channel setting of the D-2012C Remote Console Unit.
(See
p. 119
.)
4.2.8. Help
About... :
Displays the D-2000 Setting Software version number.