Toa D-2000 Series User Manual
Page 132
132
Step 2. Change the unit's network setting.
Select the unit for which you want to change the network setting, then click the "Modify IP setting"
button. The IP Setting screen is displayed.
Set the IP address, then click the "OK" button.
Step 3. Transmit changed setting data to the unit.
Clicking the "Send the setting" button transmits the IP settings to the corresponding unit and causes
the unit to be automatically restarted. Restart is completed in approximately 40 – 50 seconds.
• If a unit needs to be connected via a router, advance to Step 4 to add it.
• If the unit that should not be communicated with is displayed in the list, advance to Step 5 to delete
it from the list.
• Advance to Step 6 when all the units to be connected are displayed in "Connectable units" list.
• When the PC has two or more IP addresses, select the the unit and IP address to be communicated
with from the PC's IP address.