Toa D-2000 Series - Manual (Page 41)

41
7.1.3. Output flow view
In this flow view, output-related Fader, Meter, Xover, Filter, Comp, Delay, and Meter boxes are arranged side
by side.
Audio Out and CobraNet Out channel areas are also displayed.
Flow/Matrix selection tab
Channel information (See below.)
Mute box (See p. 83 .)
Meter (See p. 34 .)
Delay (See p. 71 .)
Compressor (See p. 56 .)
Output filter (See p. 80 .)
Xover (See p. 76 .)
Meter (See p. 34 .)
Fader (See p. 66 .)
Channel area
Stereo/monaural display
Channel name
Channel number
Slot number
Module type
• Channel information
There are two types of channel areas:
: Audio Out : CobraNet Out
Change safe group
(displayed only when the Change Safe function is enabled)