Toa D-2000 Series - Manual (Page 162)

162
Setting Item Setting Range Initial Value
Compressor/Auto-Leveler Mode Comp, Leveler Comp
Setting Item Setting Range Initial Value
Cutoff Frequency 20 Hz to 20 kHz, 1/24 octave steps 80, 500,
2.5 k, 12.5 kHz
Gain (Boost/cut) – 15 to +15 dB, 0.1 dB steps 0 dB
Q 0.267 – 69.249 4.318
FILTER ON/OFF On, Off On
[Equalizer Settings]
[Compressor/Auto-Leveler Mode Settings]
[High-Pass Filter Settings]
Setting Item Setting Range Initial Value
Cutoff Frequency 20 Hz to 20 kHz, 1/24 octave steps 20 kHz
Slope 12 dB/oct (fixed) – – –
Q 0.500 – 2.563 0.500
FILTER ON/OFF On, Off Off
[Low-Pass Filter Settings]
Setting Item Setting Range Initial Value
Cutoff Frequency 20 Hz to 20 kHz, 1/24 octave steps 20 kHz
Slope 12 dB/oct (fixed) – – –
Q 0.500 – 2.563 0.500
FILTER ON/OFF On, Off Off
[Fader Settings]
Setting Item Setting Range Initial Value
Audio In Fader Gain –∞, –69.9 to +10 dB, 0.1 dB steps –∞ dB
CobraNet In Fader Gain –∞, –69.9 to +10 dB, 0.1 dB steps –∞ dB
Audio Bus Fader Gain –∞, –69.9 to +10 dB, 0.1 dB steps 0 dB
Ext In. Fader Gain –∞, –69.9 to +10 dB, 0.1 dB steps –∞ dB
CobraNet Bus Fader Gain –∞, –69.9 to +10 dB, 0.1 dB steps –∞ dB
Audio Out Fader Gain –∞, –69.9 to +10 dB, 0.1 dB steps 0 dB
CobraNet Out Fader Gain –∞, –69.9 to +10 dB, 0.1 dB steps 0 dB
Sub In Mix Fader Gain –∞, –69.9 to +10 dB, 0.1 dB steps –∞ dB
Fader Group Tim Gain –∞, –79.9 to +10 dB, 0.1 dB steps 0 dB
Channel ON/OFF On, Off On
Grouping number Off, 1 – 255 Off