Toa D-2000 Series - Manual (Page 3)

3
7.3. Contents View .................................................................................................. 46
7.3.1. Module view
[Microphone/line Input module view (Available only when the D-921E,
D-921F, or D-2000AD1 is used)]
........................................................... 47
[Digital Input module view (Available only when the D-923AE
or D-937SP is used)]
............................................................................. 49
[Stereo Input module view
(Available only when the D-936R is used)]
............................................ 51
7.3.2. Trim view (Input trim settings) ................................................................ 52
7.3.3. Input filter view (High-pass filter/equalizer/low-pass filter settings) ........ 53
7.3.4. Comp/leveler view (Compressor/Auto-Leveler function settings)
[Compressor function settings] .............................................................. 56
[Auto-Leveler function settings (Available only for the input channel)] .. 59
7.3.5. Automix view (Auto-mixing Function Settings)
[Gate function settings] .......................................................................... 61
[NOM attenuation function settings] ....................................................... 64
[Ducker function settings] ...................................................................... 65
7.3.6. Fader view (Input/bus/output gain, input/bus/output VCA display,
and input/bus/output group trim settings) ............................................... 66
[Input, Bus, and Output gain settings (Fader display)] ........................... 67
[Input, Bus, and Output VCA displays] .................................................. 68
[Input, Bus, and Output group trim settings (Group trim display)] .......... 69
7.3.7. Sub In Mix view ...................................................................................... 70
7.3.8. Delay view (Delay function settings) ...................................................... 71
7.3.9. FBS view (Feedback suppression function settings) ............................. 73
[Feedback suppression function operations] ......................................... 75
7.3.10. Xover view (Crossover function settings)
[Crossover function settings] ................................................................. 76
[Time correction settings between Xover boxes] ................................... 79
7.3.11. Output filter view (Filter function settings) ............................................ 80
7.3.12. Mute view ............................................................................................. 83
7.4. D-981, D-983, and D-984VC Control Modules Settings
7.4.1. General description of the D-981, D-983, and D-984VC ....................... 84
7.4.2. Contact input setting screen .................................................................. 85
[Contact input function assignment: Memory] ........................................ 86
[Contact input function assignment: Volume Up or Down] .................... 86
[Contact input function assignment: Channel On/Off] ............................ 88
[Contact input function assignment: Line Input] ..................................... 89
[Contact input function assignment: LED control] .................................. 90
7.4.3. Contact output setting screen ................................................................ 91
[Contact output function assignment: Memory] ..................................... 92
[Contact output function assignment: Channel On/Off] ......................... 93
[Contact output function assignment: Line Input] ................................... 93
[Contact output function assignment: LED Control] ............................... 94
[Contact output function assignment: Through Out] .............................. 95
[Contact output function assignment: Console Switch] .......................... 96
7.4.4. VCA module setting screen (Only when the D-984VC is used) ............. 97
[VCA Channel Assignment] ................................................................... 98
7.5. CobraNet Module Settings
7.5.1. Unicast bundle example ....................................................................... 100
7.5.2. Multicast bundle example .................................................................... 101
7.5.3. CobraNet bundle settings .................................................................... 101
7.5.4. CobraNet bundle matrix settings .......................................................... 103