Toa D-2000 Series - Manual (Page 144)

144
1.1. When "Communication Connect..." is selected from the menu;
To enable communications between the PC and the unit, both setting data must be the same.
If an item of data is different from each other, transmission direction can be designated for each item.
During connection, the Communication screen is displayed.
If the setting data of PC differ from those of the destination unit, "Different" is indicated in the Status
column.
Follow the procedures below to designate the data transfer direction, and transfer the setting data.
• Transferring setting data for the selected unit in bulk
Select xxx (Unit name: "Unit 1" in the above example), and then the transfer direction.
• Designating transfer direction for each data item
Select one "Different" data item, and then its transfer direction. Repeat this process for all "Different"
data items. Different transfer direction can be selected for each data item.
After designating the data transfer direction, click the "Update" button to transfer the setting data.