Toa D-2000 Series - Manual (Page 6)

6
1. GENERAL DESCRIPTION OF THE D-2000 SETTING SOFTWARE
The D-2000 system is comprised of the D-2008SP Digital Mixing Processor, the D-2012C Remote Console
and the dedicated software used to perform settings for each unit. (In this manual, both the D-2008SP and D-
2012C are collectively referred to as the "Unit.")
For the D-2008SP, use the dedicated setting software to set the following acoustic signal processing functions
and to perform the settings for each installed module.
The largest-scale system can be configured with 4 D-2008SPs, 4 D-2012Cs, and 1 PC.
• Feedback suppressor (FBS) function
• Matrix function
• Trim gain function
• Fader function
• Filter function
• Crossover function
• Delay function
• Compressor/Leveler function
• Auto-mixing function
Equipped with 8 function keys, 12 motorized faders, and 8 rotary encoders, the D-2012C can control the D-
2008SP's signal processing parameters and faders (volumes).
Settings can be performed regardless of whether the PC and the unit are in communication (online) or not
(offline). Note that prior parameter settings for feedback suppression, level monitor and compressor reduction
indication cannot be displayed or operated without being online. The PC communicates with the unit via a
network. While they are online, the PC can remotely recall preset memories and change the settings of
acoustic signal processing on the unit in real time.
Set data can be stored in the PC.
Install the supplied D-2000 Setting Software on a PC meeting the requirements below.
Notes
• Pentium is a trademark of Intel Corporation.
• Windows and Windows Vista are trademarks of Microsoft Corporation.
• Regarding other company names and products, they are also trademarks of individual companies.
[Recommended PC requirements]
Hardware Requirements
CPU 2 GHz, Intel Pentium 4 or higher
Memory Over 1.5 GB (2 GB or more recommended)
Display 1024 x 768 resolution or higher
Free Hard Disk Space Over 16 MB (for D-2000 Setting Software installation)
or over 500 MB (when ".NET Framework" needs to be installed)
CD/DVD Drive CD-ROM drive
LAN Card Compatible to 10BASE-T or faster connection
Software Requirements
OS Windows XP Service Pack 2 or later, 32/64-bit Windows Vista,
32/64-bit Windows 7
Following are the verified operating systems:
Windows XP Service Pack 2 (Home Edition, Professional)
32-bit Windows Vista Service Pack 2 (Ultimate, Business)
64-bit Windows Vista Service Pack 2 (Business)
32-bit Windows 7 (Ultimate, Professional)
64-bit Windows 7 (Professional)
Required Component .NET Framework 3.5 SP1 (included on the supplied CD)