Toa D-2000 Series - Manual (Page 20)

20
Step 16. Perform Stereo Link Configuration settings.
Checking the checkbox of a channel allows stereo link settings for that channel in 2-channel units.
[Stereo link functions]
• Performing Stereo Link settings for adjoining channels (such as Channels 1 and 2, 3 and 4, and 5
and 6) causes signal processing parameters for Compressor/Auto-Leveler, filter, and other
functions to be linked. If a signal processing parameter for either channel is modified, the
corresponding parameter of the other "linked" channel also simultaneously changes.
• The Stereo Link function can be independently set for input and output sides. Enable the Stereo
Link setting when wishing to make the settings of both left and right channels identical, such as
when a stereo input is received from a CD player or other stereo sound source and stereo output
is sent to a tape recorder or similar stereo equipment.
[Stereo link setting restrictions]
• If you assign the bus from the stereo-linked input channel to the stereo-linked output channel, both
left and right channels are simultaneously assigned. For example, when Input 1 is stereo-linked to
Input 2, and Output 1 is linked to Output 2, if Input 1 is assigned to Output 1, Input 2 is also
similarly assigned to Output 2. However, you cannot assign Input 1 to Output 2 or Input 2 to
Output 1.
• Stereo-Link settings cannot be performed for the output channels that have employed the
crossover function. Conversely, the stereo-linked channels cannot use the crossover function.
• The FBS function cannot be used for the stereo-linked bus channels.
Step 15. Click the "Next" button.
The Stereo Link Configuration screen is displayed.