Toa D-2000 Series User Manual
Page 13
13
4.2.4. Unit
Create New Unit... :
Creates a new unit. (See
p. 15
and
p. 24
.)
Delete Unit... :
Deletes the unit from the setting data. (See
p. 25
.)
Change Unit Configuration... :
Changes the unit's input/output configuration. (See
p. 25
.)
Slot Information...
Lists the module configuration stored in the unit and the cognitive
information of the slot-mounted modules. (See
p. 26
.)
Names... :
Changes the names of the unit and its inputs and outputs. (See
p. 27
.)
4.2.5. Memory
Change
Memory (1 – 32):
Recalls one out of 32 preset memories. (See
p. 149
.)
Store
Memory (1 – 32):
Writes setting contents in one of 32 memories. (See
p. 149
.)
Memory Setting:
Performs the following settings concerning the preset memory.
(See
p. 150
.)
• Name setting
• Cross fade Time
• Fader Layer Recall
Power ON
Last Memory/Memory (1 – 32):
Select the preset memory to be recalled when the unit's power is turned
on from the Last Memory or 32 memories.
If you select the Last Memory, the unit starts with the last recalled preset
number before turning off the power.
Note
When the Change Safe function (see
p. 126
) is used, "Last Memory" or
any preset memory to which the Change Safe group or groups have been
assigned cannot be set for the Power On Memory function.
4.2.6. Communication
Connect... :
Connects the unit to a PC for online processing. (See
p. 141
.)
Disconnect... :
Disconnects the unit from a PC for offline processing. (See
p. 148
.)
Note
The unit's setting does not change while in the offline state even if it is
changed with a PC.
Bulk Transmission... :
Transmits data of the currently opened file to the unit. (See
p. 141
.)
Bulk Receiving... :
Receives the unit's data. (See
p. 141
.)
Auto Connection:
Makes an automatic connection when the file is opened next time.
Firmware:
Displays the unit's firmware version number. (Only valid when connected
online)
Comm Setting... :
Allows you to perform network settings and to designate the unit's IP
address to which this software can access. (See
p. 131
.)