Toa D-2000 Series - Manual (Page 27)

27
5.3.4. Changing the unit names
Select "Unit Names..." from the menu to display the Name Setting screen.
The Unit's name and Input/Output/Bus channel's names can be changed.
Notes
• Up to 20 alphanumeric characters can be used.
• To make the unit name blank, enter a space with the space key.
Deleting the default name cannot set it blank. (The default name remains as it is.)
[Operating the unit according to the Module settings information]
Reinstall modules into the unit according to the module settings information.
[Operating the unit according to the Module status information]
Change the Module settings information according to the following procedures.
Step 1. Reset the Unit configuration setting on the software when the PC is not in communication with the
unit.
Select the unit for which you want to change the input/output configuration in the unit view.
Select "Unit
Change Unit Configuration..." from the menu to display the Unit Configuration setting
screen. In the same procedures as for creating a new Unit configuration, set the module configuration.
(See
p. 16 .)
Step 2. Execute the bulk transmission or make communication connections with the unit by designating the
transfer direction "PC to Unit" for all data items. (See p. 145 .)