Toa D-2000 Series - Manual (Page 50)

50
(1) Channel status indication [Status]
Displays the input signal status of the selected channel.
Display Input signal status
Lock Normal
Unlock No cable connected or equipment power not
turned on
Non Audio Not an audio signal
Non PCM Not PCM data
DTS CD DTS CD
[Digital Input module view (when the D-937SP is used)]
(1)
(2)
(3)
(4)
The indications are shown by white text in green frame for the LOCK status, and white text on red
background for the error status.
Module boxes are also displayed in the same manner.
: LOCK status
: Error status
Note
If the module is used for monitor input, the status indication cannot be displayed.
(2) Sampling frequency indication [Fs (Hz)]
Displays the sampling frequency of the selected channel.
(3) Pre-emphasis ON/OFF status [Pre emphasis]
Displays the pre-emphasis ON/OFF status of the selected channel.
Non: Pre-emphasis not applied.
Detect: Pre-emphasis applied.
(4) D-937SP module input selection (Line selection) [1, 2, 3, 4] (Only when D-937SP is used)
Displays the selected status of the D-937SP module's inputs 1 – 4. The selected status is indicated by the
symbol. Double-clicking the input indication switches the selection status between "selected" and
"unselected."
Note
Unlike the MIX ALL mode of the D-936R, only one input can be selected.