Toa D-2000 Series - Manual (Page 94)

94
Contact output function assignment: LED Control
Assign an interlocking output (tally) to a terminal for controlling the D-2008SP's front panel-mounted level
indicator. A contact output closes ("makes") or opens ("breaks") in synchronization with the level indicator's
operation to light or goes out. "Make" and "Pulse" methods can be used for contact output operation, as
shown below:
Step 1. Click each terminal's Function button to select "LED Control" from the pull-down menu.
Step 2. Click the Control button to select the control method of "Make" or "Pulse" from the pull-down menu.
D-2008SP level indicator
light operation
Contact output operation
ON
OFF OFF
ON
Break
Break Break Break Break
Make
Make Make Make
Make
Break
• Make method
• Pulse method
Over 100 ms