Toa D-2000 Series - Manual (Page 51)

51
Stereo Input module view (Available only when the D-936R is used)
Click the "D-936R" box displayed on the input slot in the Flow View. The Stereo Input Module View is then
displayed on the Contents View.
The module's operation mode is displayed in the module box, which is interlocked with the Mode Display
button of the Contents view.
(1)
(2)
[Module box]
(1)
[Stereo Input module view]
(1) Mode indication button
Displays the operation mode of the module.
MIX ALL mode: Mixes 4 (stereo) line inputs. Any individual stereo input can also be disabled.
SELECT mode: Selects a single (stereo) line input. Trim settings can be performed for individual line
inputs.
You can select the mode from the pull-down menu if you click this button.
(2) ON/OFF control [1, 2, 3, 4]
• Displays the ON/OFF setting status of the module's inputs 1 – 4. The input indicated by the symbol is
set to ON.
• The input toggles between "ON" and "OFF" each time it is double-clicked.
• The thick, red frame on the ON/OFF control indicates the selected input.
• Each of Inputs 1 – 4 can be individually set to ON or OFF when in MIX ALL mode.
• Any one of inputs 1 – 4 can be set to ON when in SELECT mode.
• Only input 1 is set to ON if mode is switched from MIX ALL to SELECT mode.
• All inputs 1 – 4 are set to ON if mode is switched from SELECT to MIX ALL mode.