Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 229)

Rockwell Automation Publication 7000-UM151E-EN-P - January 2013 229
Drive Programming and Parameters Chapter 5
The VIEW PARAMETER screen displays the selected parameter, decoded per
bit as shown below.
Figure 214 - Bit description for local outputs
The screen shows the name of the bit and the current bit value within the
parameter.
The drive updates all of these values on a continual basis.
You can modify parameters from the DISPLAY screen. If the current group
contains editable parameters, press [F7] to select a parameter. Refer to
Modify
Parameters on page 214 for further details.
If you have modified any drive parameters, the interface prompts you to
permanently save your changes when exiting the DISPLAY GROUP screen.
Refer to
Message Prompting on page 225 for further details.
Custom Group
From the DISPLAY GROUP screen ( Figure 211 on page 228 ), press [F7] to
select a custom-defined group. This custom group contains selected tags from
one or more other groups in a single screen for more convenient viewing.
Figure 215 - Display Custom screen
To assign a tag to the display, use
▲
or
▼
to select an item position and press
[Enter]. Refer to Selecting a Parameter on page 205 for more information on
selecting options.