Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 212)

212 Rockwell Automation Publication 7000-UM151E-EN-P - January 2013
Chapter 5 Drive Programming and Parameters
Enter the current PIN using the data keys [0]-[9] and press [Enter]. The interface
masks the entry with asterisks in the edit field. Use [Backspace] to edit the entry
if necessary.
When prompted, type the new PIN and press [Enter]. Verify the new PIN by
typing it again and pressing [Enter], as shown below.
Figure 188 - Verifying PIN change
If you initially enter an invalid PIN or incorrectly verify the new PIN, the
interface provides error messages. Return to the appropriate line and retype the
correct or new PIN, then press [Enter].
Once the interface accepts the PIN change, press [F10] to exit.