Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 225)

Rockwell Automation Publication 7000-UM151E-EN-P - January 2013 225
Drive Programming and Parameters Chapter 5
Message Prompting
The drive stores all configuration changes in volatile memory, meaning that if the
drive loses power, it also loses record of those changes. To permanently record
changes, the drive must store configurations in NVRAM memory.
When you finish configuring drive data, the interface prompts you to save the
data as shown:
Figure 206 - Prompt to save configuration data
Press [F8] for 'Yes' to save the data. The interface will track the save status:
Figure 207 - NVRAM status screen
To save the data in temporary RAM only, press [F9] for 'No'. Press [F10] to return
you to the previous screen.
Store/Retrieve Configuration (NVRAM)
Save the data later by accessing the NVRAM screen from the top-level menu
(press [F5]). From the NVRAM screen you can access several drive memory
operations, if you have the proper access level. Refer to
Configuring Access Levels
on page 210 for more details.