Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 198)

198 Rockwell Automation Publication 7000-UM151E-EN-P - January 2013
Chapter 4 Initial Operator Interface Configuration
Setting Time
The clock controls the time stamp on drive information appearing on the alarm
summary screen.
Figure 168 - Setting the clock
To change the hour, press [F5]. Press
▲
or
▼
to increment the clock by 1 unit.
Press
◄
or
►
to increment the clock by ten units.
To change the minutes press [F5] again and repeat the procedure (repeat again to
change the seconds).
To abort the change, press [Backspace]. Press [Enter] to save the changes.
Setting Date
Like the clock, the calendar affects the date stamp on drive information appearing
on the alarm summary screen.
Figure 169 - Setting the calendar
The calendar uses the MM/DD/YY format.
To change the month, press [F4]. Press
▲
or
▼
to increment the calendar by 1
month. Press
◄
or
►
to increment the calendar by 10 months.