Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 194)

194 Rockwell Automation Publication 7000-UM151E-EN-P - January 2013
Chapter 4 Initial Operator Interface Configuration
Top-Level Menu
This screen ( Figure 162 ) provides menu access to all other operations. To select
an operation, press the corresponding softkey.
The menu screen identifies the drive and its overall operative state. Four digital
meters track selected drive parameters. A Hobbs meter displays the drive’s current
up-time.
Figure 162 - Top-level menu
Status indicates one of the following:
• NOT READY—drive is not ready to start
• READY—drive will start on command
• FORWARD RN—drive is running in the forward direction
• REVERSE RN—drive is running in the reverse direction
• WARNING — drive has a warning
• FAULTED—the drive is faulted
• DISCHARGING—waiting for the input filter capacitor to discharge on
an Active Front End drive before re-start
Accessing the Help Function
Access the Help from any screen by pressing [F1]. After the screen name is the
name of the screen from which you called the Help function; in sample show in
Figure 162 , the Help call originated from the “REV” screen. If the Help screen
contains multiple pages, use [F8]and [F9] to navigate between the pages.