Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 199)

Rockwell Automation Publication 7000-UM151E-EN-P - January 2013 199
Initial Operator Interface Configuration Chapter 4
To change the day press [F4] again and repeat the procedure (repeat again to
change the year).
To abort the change, press [Backspace]. Press [Enter] to save the changes.
You can not set the day of the week. The interface determines the day of the week
based on your date selection.
Selecting Meters
The utility screen ( Figure 165 ) shows tags assigned to four meters on the top-
level menu. You can change these meters by pressing [F8] to configure meter
selection, as shown below.
Figure 170 - Configuring meter displays
To change a meter, press
▲
or
▼
to select a meter and press [Enter]. If nothing
happens, you do not have access to this feature. Refer to Configuring Access
Levels on page 210 .Correct the access issues, and press [F8] to continue on this
screen.
See also Selecting a Parameter on page 205 for more information on tag selection.
Complete the selection process to assign the tag to the meter. The meter name
changes to a default string (i.e. V Line) as shown in
Figure 171 for meter 2.
Figure 171 - Configuring meter tags
The text consists of 8 characters and appears on the top level menu with tag value
and units.