Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 197)

Rockwell Automation Publication 7000-UM151E-EN-P - January 2013 197
Initial Operator Interface Configuration Chapter 4
.
Figure 166 - Configuring display backlight
To change the duration of the delay, press [F2]. The current backlight delay is
highlighted. Adjust for values between 0 to 60 minutes. Zero (0) disables the
delay, keeping the light on indefinitely. Press
▲
or
▼
to change the value by 1-
minute increments. Press
◄
or
►
to change the value by 10-minute increments.
Press [Backspace] to abort the edit. Press [Enter] to save the changes.
Changing Contrast
Press [F3] to access contrast configuration ( Figure 167 ). Press
▲
or
▼
to
change the contrast value. To abort the change, press [Backspace]. Press [Enter]
to save the changes.
Figure 167 - Configuring display contrast