Analog ports – Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) User Manual

Page 219

Text mode
Original mode

Rockwell Automation Publication 7000-UM151E-EN-P - January 2013

219

Drive Programming and Parameters Chapter 5

Analog Ports

You can assign any parameter to the drive’s external analog ports. To configure an
analog port, select 'Analog' from the SETUP screen and press [Enter].

Figure 199 - Analog configuration

This screen shows the current tags and codes for each analog port.

To change the tag attached to a port, use

▲

▼

to select a port and press

[Enter].

IMPORTANT To edit ANY parameter, you must have an access level above 'Monitor'.

Press [F8] and enter the appropriate PIN to access and modify drive
parameters. Refer to

Configuring Access Levels on page 210

for more

information on access security.