Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 182)

182 Rockwell Automation Publication 7000-UM151E-EN-P - January 2013
Chapter 3 Component Definition and Maintenance
Tool/Parts/Information Requirements
The following is a list of the tools recommended for proper maintenance of the
PF7000 drives. Not all of the tools may be required for a specific drive preventive
procedure, but if we were to complete all of the tasks listed above the following
tools would be required.
Tools
• 100 MHz Oscilloscope with minimum 2 Channels and memory
• 5kV DC Megger
• Digital Multimeter
• Torque Wrench
• Laptop Computer with Relevant Software and Cables
• Assorted Hand Tools (Screwdrivers, Open Ended Metric Wrenches,
Metric Sockets, etc.)
• 5/16 Allen Keys
• Speed Wrench
• Feeler Gauge
• Vacuum Bottle Checker or AC-Hipot
• Minimum of 7.5 kV Hotstick / Potential Indicator
• Minimum of 10 kV Safety Gloves
• Vacuum Cleaner with Anti-static Hose
• Anti-static Cleaning Cloth
• No. 30 Torx Driver
Documentation
• PF7000 User Manual – Publication 7000-UM151_-EN-P
• PF7000 Technical Data (Parameters, Troubleshooting) – Publication
7000-TD002_-EN-P
• PF7000 MV Drives General Handling Procedures – Publication 7000-
IN002_EN-P
• MV 400A Vacuum Contactor, Series D User Manual – Publication 1502-
UM050_-EN-P
• MV 400A Vacuum Contactor, Series E User Manual – Publication 1502-
UM052_-EN-P
• Drive-Specific Electrical and Mechanical Prints
• Drive-Specific Spare Parts List
Materials
• Torque Sealer (Yellow) Part number --- RU6048
• Electrical Joint Compound ALCOA EJC no. 2 or approved equivalent
(for Power Devices)
• Aeroshell no. 7 Part number 40025-198-01 (for Vacuum Contactors)