JLG X23J - X700AJ Service Manual - Manual (Page 97)

SECTION 3 - CHASSIS & TURNTABLE
3-70 – JLG Lift – 3121448
6. Remove the 1st reduction assembly (7).
Figure 3-169.
7. By using pliers remove the circlips (8) from their
seats placed in the hydraulic motor's pins (17).
Figure 3-170.
8. By using a puller remove the planet assemblies of
the 2nd reduction (9).
Figure 3-171.
9. By using pliers remove the circlip (11) from its seat
in the hydraulic motor (17).
Figure 3-172.
INFORMATION
IN ORDER TO PROCEED WITH THE GEARBOX DISAS-
SEMBLY, IT IS NOW NECESSARY TO REMOVE IT
FROM THE MACHINE AND BRING IT TO A PROP-
ERLY EQUIPPED WORKSHOP.
10. By using a puller, push on a metal stopper and
remove the hydraulic motor (17) from the gearbox
housing (10).
Figure 3-173.