JLG X23J - X700AJ Service Manual User Manual
Page 310
SECTION 3 - CHASSIS & TURNTABLE
3121448
– JLG Lift –
3-283
Model with fuel filter in fuel tank
– Open the tank cover and pull the fuel filter out of the tank
by its cord.
– Pull fuel supply line „1“off fuel filter „2“and insert a new
filter.
– Fit the fuel filter again and close the tank cap. Bleeding
of the fuel injection system takes place automatically.
MODEL WITH EXTERNAL FUEL FILTER
(no fuel filter in the tank)
– Empty the fuel tank by taking out screw „1“, (chapter
Checking the water trap) and allow the fuel to drain into a
clean vessel. This fuel can be reused later.
– Unscrew the fuel filter from its mount.
– Place a suitable vessel under the filter to trap the resid-
ual fuel.
– Pull off fuel supply line „1“at both ends of fuel filter „2“
and insert the new filter.
fig. B
2441 / 8